Vimar 19420.b: Pros And Cons, Common Issues, And Best Places To Purchase

Vimar 19420.B Information

the information about the Vimar 19420.B:

Introduction

The Vimar 19420.B is a methane gas detector with a white finish. It is designed to be installed in a 3-module electrical box and can be used to detect the presence of methane gas in the air. The detector has an audible and visual alarm that will sound if the concentration of methane gas in the air reaches a dangerous level. It also has a built-in solenoid valve that can be used to shut off the gas supply in the event of a leak.

Image of Vimar 19420.B methane gas detector

Specifications

  • Voltage: 230 V~ 50-60 Hz
  • Current: 10 A
  • Sensitivity: 50 ppm
  • Response time: < 10 seconds
  • Alarm level: 100 ppm
  • Alarm type: Audible and visual
  • Solenoid valve: Yes
  • Dimensions: 71 x 71 x 32 mm
  • Weight: 100 g

Features

  • Easy to install
  • Easy to use
  • Sensitive to methane gas
  • Quick response time
  • Audible and visual alarm
  • Built-in solenoid valve
  • White finish

What's in the box

  • Vimar 19420.B methane gas detector
  • Mounting plate
  • Screwdriver
  • Instruction manual
  • 01899 cylinder for testing the installation

The Vimar 19420.B is a reliable and easy-to-use methane gas detector that can help to keep you and your family safe from the dangers of gas leaks. It is a must-have for any home or business that uses natural gas.

Here are some additional safety tips for using a methane gas detector:

  • Install the detector in a well-ventilated area.
  • Test the detector regularly using the 01899 cylinder.
  • Replace the detector every 5 years.
  • If the detector alarms, evacuate the area immediately and call for help.

Vimar 19420.B Compare with Similar Item

a table comparing the Vimar 19420.B with some similar items:

FeatureVimar 19420.BLegrand CelianeGewiss System 3000
TypeSingle-gang switchSingle-gang switchSingle-gang switch
ColorWhiteWhiteWhite
MaterialPlasticPlasticPlastic
Dimensions86 x 86 x 39 mm86 x 86 x 36 mm86 x 86 x 36 mm
Weight0.08 kg0.07 kg0.07 kg
Price$10$11$10

As you can see, the Vimar 19420.B is a very similar product to the Legrand Celiane and the Gewiss System 3000. They all have the same basic features, such as being single-gang switches, being white, and being made of plastic. However, there are some small differences between them. For example, the Vimar 19420.B is slightly larger and heavier than the other two switches. It is also slightly more expensive. Ultimately, the best switch for you will depend on your individual needs and preferences.

Here is a more detailed comparison of the three switches:

FeatureVimar 19420.BLegrand CelianeGewiss System 3000
Size86 x 86 x 39 mm86 x 86 x 36 mm86 x 86 x 36 mm
Weight0.08 kg0.07 kg0.07 kg
Price$10$11$10
MaterialPlasticPlasticPlastic
ColorWhiteWhiteWhite
Number of switches111
Rated current10 A10 A10 A
Rated voltage250 V250 V250 V
IP ratingIP20IP20IP20
UL listedYesYesYes
CE certifiedYesYesYes

I hope this helps!

Vimar 19420.B Where To Buy

Vimar 19420.B is a single-gang light switch with a white finish. It is available for purchase from the following retailers:

  • Vimar Direct: This is the official website of Vimar, the manufacturer of the switch. You can purchase the switch directly from their website. Image of Vimar Direct website
  • Walmart: Walmart is a major retailer that sells a wide variety of products, including light switches. You can find Vimar 19420.B on their website or in their stores. Image of Walmart website
  • Amazon: Amazon is another major retailer that sells a wide variety of products, including light switches. You can find Vimar 19420.B on their website or in their stores. Image of Amazon website
  • Best Buy: Best Buy is a major electronics retailer that also sells a variety of other products, including light switches. You can find Vimar 19420.B on their website or in their stores. Image of Best Buy website
  • Lowes: Lowes is a major home improvement retailer that sells a variety of products, including light switches. You can find Vimar 19420.B on their website or in their stores. Image of Lowes website
  • eBay: eBay is an online auction site where you can find a variety of products, including light switches. You may be able to find Vimar 19420.B on eBay for a lower price than you would from other retailers. Image of eBay website

In addition to these retailers, you may also be able to find Vimar 19420.B at local electrical supply stores.

Vimar 19420.B Problems and Solutions

Sure. Here are some common issues and solutions for the Vimar 19420.B light switch:

  • The light switch does not turn on or off.
    • Make sure that the power is turned on to the light switch.
    • Check the light bulb to make sure that it is not burned out.
    • If the light bulb is not burned out, check the wiring to make sure that it is not damaged.
  • The light switch makes a clicking noise when it is turned on or off.
    • This is usually caused by a loose connection in the wiring.
    • To fix this, tighten the connections.
  • The light switch is not compatible with my dimmer.
    • The Vimar 19420.B light switch is not compatible with all dimmers.
    • To check if your dimmer is compatible, consult the dimmer's manual or contact the manufacturer.
  • The light switch is not working properly.
    • If you have tried all of the above solutions and the light switch is still not working properly, you may need to replace it.

Here are some step-by-step instructions on how to replace a Vimar 19420.B light switch:

  1. Turn off the power to the light switch.
  2. Remove the screws that secure the light switch to the wall.
  3. Carefully remove the light switch from the wall.
  4. Disconnect the wires from the light switch.
  5. Install the new light switch in the same way that you removed the old one.
  6. Reconnect the wires to the new light switch.
  7. Turn on the power to the light switch.

If you are not comfortable replacing the light switch yourself, you can call an electrician to do it for you.

Vimar 19420.B Manual

Vimar 19420.B Methane Gas Detector Manual

Safety Information

  • This product is intended for indoor use only.
  • Do not install the product in an area where it may be exposed to water or moisture.
  • Do not install the product near heat sources or in direct sunlight.
  • Do not tamper with the product in any way.
  • If the product malfunctions, immediately disconnect it from the power supply and contact a qualified technician.

Before Use

  • Read and understand all of the safety information in this manual before using the product.
  • Install the product in accordance with the instructions in this manual.
  • Test the product regularly to ensure that it is working properly.
  • Keep the product clean and free of dust and debris.

Troubleshooting

If the product does not work properly, check the following:

  • Is the product properly connected to the power supply?
  • Is the product in an area where it can detect methane gas?
  • Has the product been exposed to water or moisture?
  • Has the product been tampered with?

If you have checked all of these things and the product still does not work properly, contact a qualified technician.

Maintenance

  • Clean the product regularly with a soft cloth.
  • Do not use harsh chemicals or abrasive cleaners.
  • Inspect the product regularly for signs of damage.
  • If the product is damaged, do not use it and contact a qualified technician.

Warranty

This product is warranted against defects in materials and workmanship for a period of one year from the date of purchase. If the product malfunctions during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this product or to contact Vimar customer service, please visit the Vimar website at www.vimar.com or call 1-800-555-1212.

Additional Information

  • The Vimar 19420.B methane gas detector is a reliable and easy-to-use device that can help to protect you and your family from the dangers of methane gas leaks.
  • The detector is equipped with a sensitive sensor that can detect methane gas levels as low as 50 parts per million (ppm).
  • When the detector detects methane gas, it will sound an alarm and light an LED indicator.
  • The detector can also be used to control a solenoid valve, which can be used to shut off the gas supply to your home in the event of a leak.
  • The Vimar 19420.B methane gas detector is a valuable safety device that can help to keep you and your family safe.

Comments

Popular posts from this blog

Milwaukee M18 Fpd2: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Unraveling Ozito Pxdds-201: From Full Specifications To Potential Issues

Unraveling Ferm Fpkb-16: From Full Specifications To Potential Issues